Tabla de contenido
Changing the playback speed
The playback speed of MP3 files can be adjusted
with 21 stages between slow playback (50%) and
fast playback (200%). (For WMA files: 13 stages
between 50% and 120%)
The speed cannot be adjusted when PCM files are
being played back. Playback is at 1x speed (100% ).
1
Press [FAST] or [SLOW] during playback or
while the unit is stopped.
Each time you press the button, the playback speed
becomes faster (FAST) or slower (SLOW).
Status indication
Playback speed:
Playback speed can be adjusted by 10%-step for speed
faster than 100% and by 5%-step for speed slower than
100%.
Status indication during playback:
100% playback, playback faster than 100% and playback
slower than 100% are displayed as " ", " " and " "
respectively.
*
The speed cannot be adjusted for playback using folder
34
cue (➜ page 42) or timer playback (➜ page 48).
34
A-B Repeat play
Playback repeats between the start point (A) and
finish point (B) if those points are set.
1
2
Cancelling A-B Repeat:
Press [A-B&], u , i or [g STOP/RETURN].
During playback,
*
You cannot set A-B Repeat when the time between the
the playback speed
start point (A) and finish point (B) is approx. 2 seconds
is displayed.
or less.
*
When only the start point (A) is set and playback continues
until the end of the file, the end becomes the finish point
(B) and A-B Repeat begins.
*
A-B Repeat by setting the range using 2 files is not
possible.
Press [A-B&] while playing.
The start point (A) is set and
" " (blinking) and "
" are
displayed.
Press [A-B&] at the fi nish
point (B).
The display changes to "
(lighting) and repeat play starts.
"
Tabla de contenido
