Remote Control - EdilKamin IDROSALLY Instalación Uso Y Mantenimiento

REMOTE CONTROL

This controls all the functions.
Key to buttons and display:
: to turn off and on (to go from "remote control on standby" to "remote control on")
+/- : to increase/decrease the various regulations
A : AIR key: to adjust the functioning of the fan in OFF- AUTO or manual mode F1, F2, F3, F4, F5
M : MENU' key: press quickly to set the "Comfort Clima" mode or the power mode. Press for 2 seconds to access to the various
programming menus
In addition to the above-described icons, the display also gives other useful information.
- Stand-by position: shows the output temperature (TM), the set temperature (SET), the Kg of pellets (15Kg) remaining in the
hopper and the current time.
- During the ignition phase: START-UP as well as the information shown in stand-by mode
- When operating: shows the output temperature (TM), the set temperature (SET), the Kg of pellets (15Kg) still in the hopper and
the current time.
DO NOT PRESS THE BUTTON MORE THAN ONCE
Note: If the radio control is not used for a few seconds, the display will go dark as it has moved into the power-saving function.
The display can be reactivated by pressing any button.
VENTILATION ADJUSTMENT:
By pressing key A, the display will show the AIR setting, one of three different ventilation modes can be selected:
OFF: ventilation is off even when the stove is operating
AUTO: ventilation is activated automatically according to a programme for the issue of power designed by the manufacturer
MANUAL: Ventilation functions only when the stove is operating; there are 5 xed ventilation levels to choose from, starting
from the minimum (silent) F1 up to the maximum F5.
INSTRUCTIONS FOR USE
- 50
- icon ashing: remote control searching for network
- icon xed: remote control with connection enabled
keypad locked (press "A" and "M" in parallel for a few seconds
to lock or unlock the keypad)
at battery (3 mini alkaline batteries type AAA)
programming enabled
alphanumeric display consisting of 16 gures arranged in two
lines of 8 gures
- icon ashing: boiler-stove turning on
- icon xed: boiler-stove working
automatic function (display shows temperature)
.
-