Phonebook; Dial Number - JVC KD-R988BTS Manual De Instrucciones

BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by
voice is also possible if your mobile phone has the feature.
1
Press to enter Bluetooth mode.
"(First device name)" appears.
• If two Bluetooth phones are connected, press
phone.
"(Second device name)" appears.
2
Press to select an item (see the following table), then press
3 2
Repeat step until the desired item is selected/activated or follow the instructions
stated on the selected item.
To return to the previous setting item, press
RECENT CALL (Applicable only if the phone supports PBAP.)
1 Press
• "<" indicates call received, ">" indicates call made, "M" indicates call missed.
• "NO HISTORY" appears if there is no recorded call history or call number.
2 Press

PHONEBOOK

(Applicable only if the phone supports PBAP.)
1 Press
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
2 Press
3 Press
• The phonebook of the connected phone is automatically transferred to the unit when
pairing.
• This unit can display only non-accent letters. (Accent letters such as "Ú" is showns as "U".)

DIAL NUMBER

1 Press
2 Press
1
Repeat steps and
3 Press
VOICE Speak the name of the contact you want to call or the voice command to control the phone
functions. ( Make a call using voice recognition)
again to switch to another
.
to select a name or a phone number.
to call.
to select the desired letter (A to Z, 0 to 9, and OTHERS).
to select a name, then press
to select a phone number, then press
to select a number (0 to 9) or character ( , #, +).
to move the entry position.
2
until you finish entering the phone number.
to call.
Make a call using voice recognition
1 Press and hold
phone.
2 Speak the name of the contact you want to call or
the voice command to control the phone functions.
• Supported Voice Recognition features vary for each
phone. Refer to the instruction manual of the connected
phone for details.
• This unit also supports the intelligent personal assistant
.
function of iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons
(1 to 6).
1
Press
2
Press
[DIAL NUMBER], then press
3 Press
number.
If a contact is selected, press
phone number.
.
4 Press and hold one of the number buttons (1 to 6).
to call.
"MEMORY P(selected preset number)" appears when
the contact is stored.
To erase a contact from the preset memory, select
[DIAL NUMBER] in step
Make a call from memory
1
Press
2
Press one of the number buttons (1 to 6).
3
Press
"NO PRESET" appears if there is no contact stored.
to activate the connected
to enter Bluetooth mode.
to select [RECENT CALL], [PHONEBOOK] or
.
to select a contact or enter a phone
to show the
2
and store a blank number.
to enter Bluetooth mode.
to call.
ENGLISH
17