Operation And Controls; Boiling Water; Maintenance And Cleaning - Princess 232168 Instrucciones De Uso

General
This attractive Princess water kettle is
constructed from sturdy plastic. Your kettle
can boil water very quickly.
The appliance has a jug with a hinged lid, a
limescale filter, and an indication of the
water level. The kettle's base is connected
to a mains power supply.
Operation and
controls
See Figure 1.
The appliance is equipped with the
following features:
1 On/Off switch
2 Handle with indicator light
3 Lid release button
4 Cover
5 Descaling filter
6 Spout
7 Jug
8 Water-level indicator
9 Base
10 Power cord and plug
Before use for the first time
• Verify that the mains voltage is the
same as indicated on the type plate on
the appliance.
• Plug the appliance into an earthed
wall socket.
1 Take the appliance out of the
packaging.
2 Boil a full jug of water
3 Dispose of the boiled water.

Boiling water

1 Detach the jug from the base.
2 See Figure 2. Open the lid.
3 Fill the jug with the required amount of
water. To avoid damage fill the jug
between minimum and maximum. Make
sure that you do not spill any water on
the base.
4 Close the jug's lid by pressing it until it
clicks into place.
5 Place the jug on the base and insert the
plug in the wall socket. Push the On/Off
switch to position I so that the indicator
lamp illuminates.
6 The kettle is now switched on and the
water will begin to heat. The kettle
switches off automatically a few
seconds after the water has come to
the boil. However, this automatic cut-out
operates only when the jug's lid is
closed securely. If so required you can
stop heating the water by pushing the
On/Off switch to position 0.
7 The indicator light extinguishes once
the kettle is switched off.
8 A further quantity of water can be boiled
once the appliance has cooled down
(after about 5 minutes).
9 The kettle is fitted with a triple
safeguard which prevents the kettle
from producing too much steam, boiling
dry, or overheating. The safeguard will
switch off the kettle if it is operated
without water. Allow the kettle to cool
down for at least 10 minutes before
using it again.
Maintenance
and cleaning
• Never use harsh, corrosive or
scouring cleaning agents or sharp
objects (such as knives or hard
brushes) to clean the appliance.
Article 232168/232174 Water Kettle Wave Black 1l/2l 5