Main Features - Fulbat FULLOAD 1000 Manual De Instrucciones

EN
INSTRUCTION MANUAL
LITHIUM (LiFePO4) & LEAD ACID COMPATIBLE
This manual contains important safety and operating instructions
for 6V/12V battery charger: Fulload 1000.
IMPORTANT SAFETY INSTRUCTIONS. Please read this manual and
follow the instructions carefully before using the charger.
WARNING
• The charger is designed to charge 6V & 12V lead-acid and lithium
(LiFePO4) batteries from 2Ah to 20Ah. However, charger can maintain
batteries up to 40Ah.
• We always recommend that you check the Battery Manufacturers
specifications before using this charger.
• Explosive gases may escape from the battery during charging. Provide
ventilation to prevent flames and sparks.
• For indoor use. Do not expose charger to rain, snow or liquids.
• For charging lead-acid and lithium (LiFePO4) batteries ONLY. (of the
size & voltage indicated in the specifications table).
• Battery acid is corrosive. Rinse immediately with water if acid comes
into contact with skin or eyes.
• The charger should be used on a flat surface.
• Never charge a frozen battery.
• Never charge a damaged battery.
• Never place the charger on the battery while charging.
• Be extra cautious to reduce risk of dropping a metal tool onto battery.
It might spark or short-circuit battery or other electrical part that
may cause explosion.
• When working with a lead-acid battery, remove personal metal items
such as rings, bracelets, necklaces, watches...
• NEVER smoke or allow a spark or flame in vicinity of battery or engine.
• Do not charge non-rechargeable batteries.
• In order to reduce risk of electric shock, unplug charger from AC
outlet before doing any maintenance or cleaning. Turn off controls
will reduce risk.
• The kit is not supposed to be used by children or by people who are
not able to understand the manual, unless they are supervised by a
responsible person who ensures the proper use of the kit.

MAIN FEATURES

Automatic Switching Mode Battery Charger & Maintainer.
• Easy to Use: The Battery Charger is easy to operate and requires no
technical experience.
• Charge & Maintain - Automatic Charge: On power up, the charger will
automatically go to charging system, then could be left unattended
and never overcharge your batteries.
• Charge & Maintain - Automatic Maintenance: When the battery is
FULBAT - www.fulbat.com
charged to «full» state, the charger automatically switches to maintain
the battery. It will monitor the battery voltage and continue to peak
performance to the battery.
• Voltage Output Select Switch: Select 6V or 12V output.
• Short circuit protection: The charger will automatically turn off when
the output short circuit occurred and prevent any damage.
• Reverse polarity protection : The charger can automatically shut off
when the output polarity is reversed and without damage.
SAFETY & TEMPERATURE FEATURES
• Never overcharge your battery.
• Output short circuit protection.
• Output overload protection: the charger employs the use of a 'Solid
State Circuit Interrupter' that opens under severe overload. This
condition may occur if attempting to charge any severely discharged
or heavily sulfated battery. Once the Interrupter opens, the charger
will stop charging for a short period and then resume charging au-
tomatically and the yellow. L.E.D. will be OFF, until resume charging.
Overloading could be due to an external load, remove the load condition
prior to attempting to recharge the battery.
• Reserve Battery / Overload Condition: The charger has reverse
battery and short circuit protection. If a reverse battery condition
exists (White L.E.D. will turn RED, only, while output leads are connec-
ted backwards), simply unplug charger from AC power and properly
remake the connections as described in this manual.
• Internal over heat protection: Fulload chargers have an internal overheat
protection. The power will be reduced of the ambient temperature is raised.
• Corrosion-resistant output connectors.
• Output clips and ring terminals provided: It comes with a quick connect
fly lead and 2 different kinds of connectors, crocodile clips and a ring
terminals. The ring terminals are perfect for permanent connection
to your battery. You can connect the lead to the battery and tuck the
lead away while you are using your vehicle and when you get back to
your garage simply plug the lead back into the charger.
BATTERY TYPES & CAPACITY
• Suits all lead acid type batteries (Conventional, AGM & Gel) and lithium
(LiFePO4)...
• Selectable 6 Volt & 12 volt output.
• Battery capacity: the following maximum Ah capacities are to be used
as a general guide only: some batteries maybe able to handle a higher
charge current. Check with the battery manufacturer when charging
batteries with small capacity.
Charge current
Battery Capacity: charging
Battery Capacity: maintaining
2
1A
2-20Ah
2-40Ah