Orbegozo PHE 75 Manual De Instrucciones página 30

PHE 75/PHE 80
5. Assebmle the flame screen to the upper
support.
Secure the flame screen to the upper support
using 8pcs screw 3/16".
3/16" Screw
screwdriver
6. Assemble the reflector onto the flame
screen.
Screw the 3pcs stud on the flame screen,
put 3pcs washer Φ6 onto the top of stud,
then put the reflector onto the stud, secure
them with 3pcs washer Φ6 and 3pcs wing
nut.
Wing nut
Washer Φ6
Stud
7. Carefully install the glass tube by lifting up
and inserting through the center hole in the
upper plate. Ensure the black silicone ring is
attached to the lower edge of the glass tube
as illustrated. Slide the glass tube through the
hole of the lower plate cover and onto the
middle plate. Check and ensure that the glass
tube is positioned properly and is completely
covering the center hole of the middle plate.
WARNING! The black silicone ring must be in place
prior to operating the heater.
30