Firmware Version; Stored Files; Storage Space; Connecting The Camera To A Computer - MINOX DTC 600 Manual De Instrucciones

use the arrow keys Up/Down to choose from the fol-
lowing information items: Stored files, memory space,

Firmware version.

Stored files

Go to the menu item "stored files" in the menu and
press the OK button or the right arrow key. This will
take you to the submenu. In the submenu you will see
a display of the stored files with number via the symbols
camera and video. Press the Menu button to return to
the Start menu.

Storage space

Go to the menu item "Storage space" in the menu and
press the OK button or the right arrow key. This will take
you to the submenu. In the submenu you will see a display
of the "Used storage space" and "Free storage space".
Press the Menu button to return to the main smenu.
Firmware version
Go to the menu item "Firmware version" in the menu
and press the OK button or the right arrow key. This will
take you to the submenu. In the submenu you will see a
display of the current Firmware version. Press the Menu
button to return to the main menu.
34
Connecting the camera
to a computer
Always ensure that the camera is switched off before
connecting it to your computer.
Connect the camera to a computer using the provided
USB cable. Switch the camera to the ON mode (Main
switch in right hand position). Now the camera is de-
tected as a mass storage device. Images or video clips
can be viewed directly.
Transferring images and videos
to a computer
Always ensure that the camera is switched off before
removing the SD card from the card slot, as the memory
may otherwise be damaged. Remove the memory card
from the slot and insert it into a memory card reader
that is connected to your computer. The transfer of the
images or video clips to your computer can now begin.