Whirlpool 8MWTW2024 Manual Del Usario página 13

7. Select the load size
Choose the load size that best fit the amount of clothes that you
want to wash. Follow the load size indicator in the basket
(Intelicarga).
The setting CH from the load size control will add less water for
small loads. The XG option will add more water for big loads or
bulky garments. The items must be able to move freely inside of
the basket.

For models with Auto Level, the washer
will calculate the load size automatically.
See page 6 for more details.
8. Select the cycle options
Once you select a cycle, the preset options for this cycle will turn
ON. Press the buttons to change the cycle options; Load size
(some models), temperature, soil level, Soak, Additional rinse
and/or Delayed Start.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
Energy and to protect your clothes. This
will be cooler than your hot water heater
setting.
Warm
Some cold water will be added, so this
will be cooler than the water provided by
your heater.
Cool
This is the temperature from your faucet.
09-Feb-2018 07:28:55 EST | RELEASED
9. Close the lid
IMPORTANT: When the washer has finished the filling part of the
cycle and the lid is still open, you will see that the different stage
lights will flash, indicating that you need to close the lid. If the lid
is not closed within 10 minutes, the cycle will be canceled and the
water will be drained automatically.
10.
Press the START/PAUSE button to start the wash cycle.
When the cycle has finished, the Done indicator will light.
NOTE: If a manual cycle is required, follow the instructions from
section "MANUAL SELECTION OF THE WASHING STAGES"
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and rusting of metal hooks, zippers, and
snaps.
Unlocking the lid to add garments:
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE, add items, close the lid and press
Suggested Fabrics
START/PAUSE again to continue the cycle.
Whites and pastels
Unlocking the lid during Drain/Spin cycle:
Durable garments
Heavy soils
Press START/PAUSE; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press
Bright colors
START/PAUSE again to restart the cycle.
Moderate to light
soils
If lid is left open for more than 10 minutes the water will pump out
automatically.
Dark colors that
bleed or fade
Light soils
Press and hold the START/PAUSE button for 4 to 6 seconds to
cancel the cycle or press START/PAUSE and turn the cycle knob
to Off option, leaving it for 3 seconds.
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Press START/Pause to begin wash
cycle
HOW TO CANCEL A CYCLE
Close the lid for
maximum washing
performance
13