Whirlpool 8MWTW2024 Manual Del Usario página 12

3. Add liquid chlorine bleach to dispenser
Fabric softener
3.1 Pour a measured amount of fabric softener into the tray.
Always follow the manufacturer's instructions to use the correct
amount of fabric softener depending on the size of the load. Close
the dispenser drawer.
IMPORTANT: Do not overfill or dilute. Overfilling the dispenser
may cause the fabric softener to immediately pour into the
washer. It is normal for a small amount to remain in the dispenser
at the end of the cycle
3.2 For models without dispenser, add a measure of liquid fabric
softener to the agitator tank. Always follow the manufacturer's
instructions to use the correct quantity of fabric softener
depending on the size of the load.
Dilute the liquid fabric softener by filling the tank with Warm water
until the liquid reaches the bottom of the edge. See the arrow on
the maximum fill line
If you want to add the softener manually
During the final rinse, wait until the washing machine has finished
filling.
Lift the lid and add the recommended amount of liquid softener
diluted in 1/2 cup to 1 cup (125 ml to 260 ml) of warm water. Do
not pour fabric softener directly onto garments and avoid
splashing the items in the basket.
Do not use more than the recommended amount. Close the cover
to continue the cycle.
IMPORTANT: If you leave the lid open for more than 10 minutes,
the washer will drain and the cycle will be canceled.
4. Add liquid chlorine to the dispenser
09-Feb-2018 07:28:55 EST | RELEASED
Do not overfill, dilute, or use more than 1 cup (250 mL). Do not
use color-safe bleach or Oxi products in the same cycle with
liquid chlorine bleach.
5. Load laundry into washer
Max level
Load garments in loose heaps evenly around basket wall. For
best results, do not load higher than the recommended maximum
load height. Do not wrap large items such as sheets around the
wash plate; load them in loose piles around the sides of the
basket. Try mixing different sized items to reduce tangling.
IMPORTANT:
Items need to move freely. Overloading can lead to poor cleaning
performance, and may increase wrinkling and tangling.
6. Select a cycle
Turn the cycle knob to select the wash cycle. To see more
information, please read the "Cycle Guide" section.
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Max height
recommended
Do not overload or force items into washer.
12