Protective Circuit; Moving And Storage - Bremshey Sport TREADLINE TRAIL Manual Del Usuario

dealer for service.
Lift motor error. Unplug the electrical cord
E6, E7:
from the wall outlet and from the treadmill, wait
1 minute and turn the power switch on again. If
treadmill recovers to normal operation, you may
continue to use the treadmill. Otherwise, call the
dealer for service.

PROTECTIVE CIRCUIT

The machine will shut off when the electricity load is
above the machine's capacity. To restart the machine,
please follow the procedure below:
Unplug the power cord from the machine's socket.
A.
Push in the safety switch.
B.
Replug the power cord into the machine's socket.
C.
NOTE! DON'T PUSH IN THE SAFETY SWITCH BEFORE
UNPLUGGING THE MACHINE'S POWER CORD.
If you leave the treadmill plugged in after turning
off the console, there will still be current running to
the console. This treadmill is equipped with a safety
control program that will automatically shut down
the machine after six hours of no use. In the event of
an automatic shut down, please follow the procedure
below to restart the treadmill:
Unplug the power cord form the machine's socket.
A.
Replug the power cord into the machine's socket to
restart the machine.

MOVING AND STORAGE

After assembly is complete, you may fold the machine
into the upright position for storage. To hold the
machine, raise the desk until it locks in to position.
Make sure you hear the click sound of the deck
NOTE!
locking into position. This is to ensure the deck is
locked in place and will not drop back down.
Make sure the treadmill's incline is at 0 before
NOTE!
AFNA_Trail_1.indd 9
folding the deck. If the incline is not at 0, folding will
damage the mechanism.
Safety switch
ON/OFF
Power cord
First push the frame toward the console, then step on
the pedal. Now you can lower the deck to the floor.
NOTE!
feature to help the deck lower slowly. Please make
sure there are no children or other things under the
deck when you lower it.
TO MOVE THE TREADMILL
Before moving the TRAIL, be sure the power cord
is unplugged from the wall and the treadmill. Fold
up the running deck until it is locked and push the
equipment on the transportation wheels. Lower the
treadmill carefully onto the floor. Hold the handlebar
to move forward the treadmill.
NOTE!
over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment.
O W N E R ' S M A N U A L • T R A I L
This machine has a built-in safety unfolding
Transport the treadmill with extreme caution
G B
9
8.8.2008 12:06:03