Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Familiarise yourself with the functions of the device before actually
using it.
•
All modifications of the device are forbidden for safety reasons.
•
Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is
not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
•
Note that damage caused by user modifications to the device is not
covered by the warranty.
4. Features
•
flat, portable design
•
large display with blue backlight
•
selectable weighing units: gram, carat, pennyweight and tael troy
•
auto calibration (calibration weight not included)
•
overload alarm
•
auto power off (after 60 seconds)
5. Operation
•
Open the plastic cover and place the scale on a flat, steady
vibration-free surface and.
•
Press the On/Off button [F] to switch on the scale. After
initialization, the LCD display [D] shows the stable measurement
indication [A] and the zero weight indication [B].
•
Select the desired weighing unit (gram, carat, pennyweight or
grains) by pressing on the mode button [G]. The selected unit is
shown on the display [C].
•
Place the weight on the balance as close to the centre as
possible. Wait until the measurement is stabilized ([A]), and read
the weight on the display.
•
When tare needs to be subtracted, place the tare weight on the
scale and wait until the measurement is stabilized. Press the tare
button [E] to reset the scale to zero; the word 'ZERO' [B] is
indicated on the display.
•
Note that the scale has an auto-power off function. The scale will
switch off after ±60 seconds when no activity is detected.
•
To calibrate the scale, a weight of exactly 500g (or 2500 carat,
321.5075 pennyweight) is needed.
•
Press and hold the mode button [G] until the word 'CAL' flashes.
Put down the calibration weight and wait until the word 'PASS'
appears. The scale is now calibrated. Remove the weight.
16/06/2009
VTBAL11
4
©Velleman Components nv
Rev. 01
®
Tabla de contenido
