B - Error Codes; Technical Data - Olimpia splendid DOLCECLIMA AIR PRO Manual De Instrucciones Para El Uso Y El Mantenimiento

4.2.b Error codes
During the appliance functioning, a few anomalies which stop its functioning could appear.
In these cases, some error codes appear on the control panel.
• P1 Lower tray full.
• Empty it by operating as described in paragraph 4.2.a
-------------------------------------------------------------------
• F1 Filters cleaning.
• Message F1 appears every 250 hours of operation of the fan motor.
Proceed with the filters cleaning (paragraphs 4.1.b - 4.1.c - 4.1.d) and reset the hours counting by
keeping key "ON/OFF" on the appliance control panel pressed for 5 seconds.
-------------------------------------------------------------------
• E1 Environment temperature sensor error.
• E2 Evaporator temperature sensor error.
• E3 Condenser temperature sensor error
• E4 Display panel communication error.
In these cases:
a. electrically disconnect the appliance
b. wait a few minutes
c. connect the plug to the power socket
d. restart the appliance.
If the inconvenience persists and the error code doesn't turn off, electrically disconnect the
appliance and refer to an Assistance Centre.

5 - TECHNICAL DATA

For the technical data, please consult the data plate applied to the product (Fig.2).
• Dimensions (W x H x D)
• Working temperature limits in
Cooling function
• Working temperature limits in
Dehumidification function
• Working temperature limits in
Heating mode (heat pump)
• Refrigerant gas
EN - 25
490 x 765 x 425 mm
17°C÷35°C (62 F ÷ 95 F)
13°C÷35°C (55 F ÷ 95 F)
5°C÷30°C (41 F ÷ 86 F)
R410A