Dehumidification Mode (Dry); Ventilation Mode (Fan); Heating Mode (Heat); (Only For Version With Heat Pump) - Olimpia splendid DOLCECLIMA AIR PRO Manual De Instrucciones Para El Uso Y El Mantenimiento

c. In this mode it is not possible to select either the fan speed and the temperature.
d. To switch off the function, press key "MODE" on the control panel or switch off the appliance.

3.8 DEHUMIDIFICATION MODE (DRY)

a. When this mode is selected, the appliance dehumidifies the environment.
This mode can be selected by pressing the key "MODE" once or more (on the remote control or on the
control panel) until when the specific icon appears:
- on the control panel
b. In DRY mode, it is not possible to select the fan speed or to adjust temperature.
The fan motor works at low speed.
c. Keep doors and windows closed to achieve the best dehumidifying effect.
Do not place the air outlet pipe out of a window.
d. Connect the condensation discharge pipe (paragraph 2.6.a)

3.9 VENTILATION MODE (FAN)

a. When this mode is selected, the appliance doesn't perform any action both on temperature or on air
humidity in the environment, but only maintains it in circulation.
b. This mode can be selected by pressing the key "MODE" once or more (on the remote control or on the
control panel) until when the specific icon is shown on the display of the control panel and/or of the remote
control.
- icon on the control panel
c. In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key "FAN" on the remote control or the key
d. The fan speed is displayed as indicated in paragraphs "3.1" (point SW7) and "3.2" (point D7).

3.10 HEATING MODE (HEAT)

(only for version with heat pump)

a. When this mode is selected, the appliance heats the environment.
b. This mode can be selected by pressing the key "MODE" once or more (on the remote control or on the
control panel) until when the specific icon
c. In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key "FAN" on the remote control or the key
The fan speed is displayed as indicated in paragraphs "3.1" (point SW7) and "3.2" (point D7).
d. The temperature set-point is included between 17°C and 30°C (from 62 F and 86 F) with 1°C variations
and it can be set using the keys +/- on the control panel or with the keys ▲ ▼ on the remote control.
e. After a certain time (maximum three minutes) after the activation of the operation mode, the heat pump
activates and the appliance starts delivering warm air.
f. Connect the condensation discharge pipe (paragraph 2.6.b)
EN - 19
- on the remote control display.
- icon on the remote control display
on the control panel.
is shown on the display.
on the control panel.