Reversing the door swing
CAUTION: To avoid injuries to yourself or
other people and/or property damages,
have another person assist you during the
door reversal procedure.
• Make sure the appliance is unplugged
from power and empty.
• Place the two leveling legs at their high-
est position.
Tools needed:
• Phillips screwdriver.
Note: In order to remove the door it is nec-
essary to tilt the appliance backwards.
Lean the appliance on a solid object like a
chair just below the top panel so you can
access the bottom of the refrigerator.
WARNING: DO NOT LAY THE
APPLIANCE COMPLETELY FLAT
SINCE THIS COULD CAUSE
DAMAGES TO THE REFRIGERA-
TION SYSTEM.
1. Remove the plastic cap from the top
hinge.
2. Remove the three screws from the bot-
tom bracket. Remove the leg from op-
posite side.
3. Place these parts aside.
4. Slide the appliance door down about 15
cm and off the top hinge pin. Lift door
away from the appliance.
29