Ec Declaration Of Conformity - SystemAir TLP 125/1,2 Instrucciones De Funcionamiento

GB IE
Manufacturer
Our products are manufactured in compliance with
applicable international standards and regulations.
The manufacturer hereby confirms that the following
products:
Duct fans, circular ducts
K*, KV*, KVK*, KVKE*, KD, KVKF*, KVO*
Duct fans, rectangular ducts
KE, KT, RS, RSI, KDRE, KDRD, RS30-15/RS40-20*
Centrifugal fans
CE, CT, CKS, CE140/S/M/L-125/160*
Roof fans
TFER*, TFE, TFD, TOE, TFEQ, TFDQ, TOV, TFE220*
Wall fan
RVF*
Air handling unit
TLP
Comply with the following EC-directives:

EC Declaration of Conformity

as defined by the EC Machinery Directive
98/37/EEC, Annex II A. Fans for ventilation in air handling
systems with air from non-explosion hazardous premises.
This machinery must not be put into operation until prior to
reading mounting instructions and safety information.
The following harmonized standards are in use:
EN 60 034-1 Rotating electric machinery; ratings and
performances.
EN 60 204-1
Safety of machinery; electrical equipment of machines;
general requirements.
SS-EN ISO 12100-1:2003.
Safety of machinery; basic concepts, general principles for
design.
EN 294
Safety of machinery; safety distances to prevent danger
zones reached by the upper limbs.
Remark: EN 294 only complies when fitted contact safety
device is part of the extent of delivery.
Systemair AB
Industrivägen 3
SE-739 30 Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
EC Declaration of Conformity
as defined by the EC Low Voltage Directive 73/23/EEC and
93/68/EEC
The following harmonized standards are in use:
EN 60 204-1
Safety of machinery; electrical equipment of machines;
general requirements.
EN 60 034-5
Rotating electric machinery; part 5: Protection classification
for electric machinery.
EN 60 335-1 (valid for items marked with *)
Electric domestic products and similar – safety-general
requirements.
EN 60 335-2-80 (valid for items marked with *)
Electric domestic products and similar – safety-general part
2: Special requirements regarding fans.
EN 50 106 Electric domestic products and similar-Safety-
Instructions for control of manufacture. Remark: EN 50 106
complies for internally wired products only.
EC Declaration of Conformity
as defined by EC's EMC-directive 89/336/EEC, 92/31/EEC
and 93/68/EEC
The following harmonized standards are in use :
EN 61000-6-3: Electromagnetic compatibility - Generic
immunity-Emission –Part 1: General requirements for
equipment in homes, offices, shops and similar
environments.
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part
6-2: General requirements – Immunity for appliances in
industrial environments.
The complete technical documentation is available.
Skinnskatteberg, 26 June 2002
Mats Sándor
Technical Manager
5