Metal grease filter maintenance
The metal filter traps grease released by foods on the cooktop. The filter must always be installed when the hood is
operating / used.
To remove:
•
Push the filter lock / pivot in direction to the center of the filter.
•
Once the pivot is pushed pull down the filter slowly.
To replace:
•
Insert the filter tabs into the slots
•
Push the filter lock / pivot in direction to the center of the filter.
•
Once the pivot is pushed, raise the filter slowly until the top and release the pivot.
To clean:
•
Swish the filter in hot soapy water and rinse in clean water or wash it in the dish washer.
•
Do not use abrasive cleaners.
1