Tabla de contenido
6
7a
7b
8
English
Wrap the threads on the nipple using plumber's tape.
Install the nipple assembly using the service key (in-
cluded) and a 10 mm Allen wrench (not included).
10 mm
Use a level to make sure that the flat edges of the
nipple flange are level.
Use the service key to reposition the flange if
necessary.
If you wish to be able to tilt the spray up and down,
the flat edges should be at the top and bottom.
If you wish to be able to tilt the spray from side to
side, the flat edges should be at the sides.
Do not overtighten the nipple
assembly.
Installation with rough 28486181
Tabla de contenido
