Base Assembly - Orbegozo PHF 40 Manual De Instrucciones

PHF 40
Figure 1

3. BASE ASSEMBLY

As indicated in the figure below, pass the electrical cable from the base inside
the tube section (corresponding to the base). Turn the base over. It must
remain stable. Turn the tube in its setting. Tighten it, but do not attach it yet.
Figure 2
4 . ASSEMBLY OF THE THIRD SECTION OF THE TUBE
Pass the electrical cable coming from the base through the third section of the
tube. Attach this section to the section already attached to the base, without
screwing it on for the time being.
14