Mounting The Loop Handle - Stihl FS 70 Manual De Instrucciones

Approved Combinations
The complete combination includes:
Cutting Attachment
–
Deflector
–
Handle
–
Harness
–
Select correct combination from the
table according to the cutting
attachment you intend to use. Read the
table horizontally from left to right.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 20-2 mowing head
2 STIHL Autocut C 25-2 mowing head
3 STIHL Autocut 25-2 mowing head
4 STIHL TrimCut 31-2 mowing head
5 STIHL PolyCut 20-3 mowing head
6 STIHL FixCut 25-2 mowing head
Metal cutting attachments
7 Grass cutting blade 230-4
8 Grass cutting blade 230-8
WARNING
Non-metal grass cutting blades are not
approved.
Deflectors
9 Deflector with blade for mowing
heads only
10 Deflector for grass cutting blades
only
FS 70 RC
Handles
11 Loop handle
12 Loop handle with
13 Barrier bar
Harnesses
14 Shoulder strap may be used
15 Shoulder strap must be used
16 Full harness may be used
Warning!
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of con-
trol and contact with the cutting
attachment: use grass cutting metal
blades on this unit only if equipped with
a bike handle or a loop handle with bar-
rier bar.
Do not use rigid plastic blades, brush
knifes or circular saw blades on this unit.

Mounting the Loop Handle

A factory-new machines comes with the
loop handle aready mounted.
Using the barrier bar
A barrier bar may have to be mounted to
suit the tool you intend to use – see
"Approved Combinations of Cutting
Attachment, Deflector, Handle and
Harness."
The barrier bar comes standard with the
machine or is available as a special
accessory.
English
17