Tabla de contenido
1
1
26
1
1
Basic Operation
Selecting the Monitor
Opening Angle
The monitor opening angle can be set in 2
positions.
Press and hold the OPEN/CLOSE button for at
least 2 seconds while the monitor is being
raised. Each press changes the monitor angle
back or forth.
Adjusting the Monitor
Viewing Angle
Adjust the monitor's angle for better visibility.
Press the
and
adjust the monitor's angle so the screen will be
in the best viewing position. Each press of the
buttons produces a beep and changes the
screen angle between 80 and 104 degrees.
Notes: • If the monitor touches an obstacle
while the angle is being adjusted the
unit will stop the screen immediately.
Should this happen, remove the
obstacle and press the
button again.
• The screen color will vary when
viewed at certain angles. Adjust the
screen angle for the best viewing
position.
• If the voltage of the vehicle's battery
power is low, the screen may blink
when the screen angle is changed.
This is normal and not a malfunction.
English
(ANGLE) buttons to
or
Tabla de contenido
