Adjusting Blade Guidance; Adjusting Blade Tension; Changing The Blade - HOLZMANN MASCHINEN BBS350 Instrucciones De Servicio

18.2.3

Adjusting blade guidance

18.2.4

Adjusting blade tension

18.2.5

Changing the blade

HOLZMANN MASCHINEN GmbH
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
www.holzmann-maschinen.at
Adjust rolls of the blade guide in a way that
there is a gap between rolls and blade of a
paper width.
To do this, loosen the screws and adjust the
rolls, then tighten the screws again.
Proper blade tension is achieved if the blade
defects no more than 3-6 cm when it is firmly
moved by hand at the center location of the
blade.
To increase blade tension rotate the lever for
the sawblade tension clockwise.
NOTICE
Make sure the tracking adjustment
bolt is sitting in recess. See Picture.
Loosen screws and remove the guides.

Reduce the blade tension and remove

the blade.
Insert the new blade and re-assemble

the guides.
Adjust the required blade tension as

described above.
30
BBS 350