Accessories / Spare Parts - Sundstrom SR 700 Instrucciones De Uso

Ocultar thumbs Ver también para SR 700:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28

2.2 Accessories / Spare parts

Fig. 2.
No. Part
1.
Hood SR 561
2.
Hood SR 562
3.
Hood SR 520 M/L
3.
Hood SR 520 S/M
4.
Hood SR 530
5.
Hood SR 601
5.
Hood SR 602
6.
Face shield SR 570
7.
Full face mask SR 200, PC-visor
7.
Full face mask SR 200, glass visor
8.
Full face mask SR 200 Airline, PC visor H03-1012
8.
Full face mask SR 200 Airline, glass visor H03-1212
9.
Half mask SR 900 S
9.
Half mask SR 900 M
9.
Half mask SR 900 L
10. Welding shield SR 592
12. Hose SR 550
12. Hose SR 551
13. Hose SR 951
14. Twin hose SR 952
15. Helmet with Visor SR 580
16. Steel net disc SR 336
17. Storage bag SR 505
18. Leather belt SR 503
18. Leather belt SR 503, Large
19. Belt SR 508
19. Rubber belt SR 504
19. Belt PVC
20. Gasket to fan
21. Harness SR 552
22. Particle filter P3 R, SR 710
3. Use
3.1 Installation
See also the user instruction for the head top.
3.1.2 Filters
Read carefully the user instructions accompanying the
filters.
Particle filter
The fan unit may be used with only particle filters P3 R
(PAPR-P3), model number SR 510 with filter adapter
or SR 710, which provides protection against all types
of particles, both solid and liquid.
Note!
• When filters are changed, both filters must be
changed at the same time.
Pre-filter
The pre-filters SR 221 protect the main filter against
excessively fast clogging. The pre-filter holders also
protect the main filters against handling damage.
3.2 Assembly
a) Battery
• Remove and charge the battery. Fig. 5, 6, 7.
The charger carries out charging automatically in
three stages. Fig. 8.
1. Orange LED.
2. Yellow LED.
3. Green LED.
• Put the battery back. Fig. 9.
Warning!
• Always recharge the battery before it has become
fully discharged.
Ordering No.
• The charger may be used only for charging the
H06-5012
batteries for the SR 700.
H06-5112
• The battery may be charged only with a genuine
H06-0212
Sundström charger.
H06-0312
• The charger is designed only for use indoors.
H06-0412
• The charger must not be covered while it is in use.
H06-5412
• The charger must be protected against moisture.
H06-5512
• Never short circuit the battery.
H06-6512
• Never try to dismantle the battery.
H01-1212
• Never expose the battery to a naked flame. There is
H01-1312
risk of explosion/fire.
b) Belt
H01-3012
• Assemble the belt. Fig. 10, 11, 12.
H01-3112
Note!
H01-3212
Study the illustrations carefully to ensure that the belt
H06-4412
will not end up upside down or back to front.
T01-1216
T01-1218
c) Breathing hose
T01-3003
Read carefully the user instructions accompanying the
R01-3009
head top.
H06-8012
Full face mask SR 200
T01-2001
• Assemble the hose between Full face mask SR 200
T06-0102
and particle filter fan unit SR 700. Fig. 13, 14, 15.
T06-0103
T06-0107
• Check that the hose is firmly secured.
R06-0101
T06-0104
Half mask SR 900:
T06-0124
• Assemble the hose between half mask SR 900 and
R06-0107
particle filter fan unit SR 700. Fig. 16, 17.
T06-0116
• Check that the hose is firmly secured.
H02-1512
d) Particle filters
Two filters must always be used at the same time.
• Check that the gaskets in the filter mounting of the fan
unit are in place and are in good condition. Fig. 18.
• If particle filter SR 510 are used, snap it on the filter
adapter without pressing onto the centre of the filter.
• Screw the filter into the filter mounting so far that
the adapter will be in contact with the gasket. Then
turn it about 1/8 of a turn further in order to ensure
a good seal. Fig. 19.
e) Pre-filters SR 221
• Assemble the pre-filters. Fig. 20, 21.
f) Plug kit
The Plug kit is used for cleaning or decontamination of
the fan unit and prevents dirt and water from entering
the fan housing.
Disconnect the breathing hose and the filters and install
the plugs. Fig. 35.
3.3 Operation/performance
Display
Fig. 22.
a) Battery symbol that lights up with a yellow light when
the battery capacity is low.
b) Triangle that lights up with a red light if the air flow
should cease or if the filters are clogged.
c) Small fan symbol that lights up with a green light
during normal operation.
d) Bigger fan symbol that lights up with a green light
during boosted operation
25
Tabla de contenido
loading

Tabla de contenido