Maintenance; Troubleshooting - Num'axes EASY DOG SOFT Manual De Instrucciones

appliance for 3 months or more. The collar will memorize the confi guration chosen (coding).
- Keep your EASY DOG unit out of reach of children. It is not a toy for you or your children.

Maintenance

- Avoid cleaning the unit with volatile liquids such as solvents or cleaning fl uids. Use a soft cloth and
neutral detergent.
- In order to maintain water tightness, we recommend the replacement of the seal located in the receiver
collar every year.
- The strap can be washed with soapy water.

Troubleshooting

Should your product stop working or develop a fault, fi rst read this user's guide over, then check the
batteries and replace them if necessary and retry. Also check that you are using the product correctly.
If you encounter any problem, re-code the receiver collar (ref. re-coding procedure).
Reinitialize the system as follows:
- Remove the collar battery from its housing
- With a metallic tool (e.g. screwdriver, scissors) touch each of the 2 battery contacts for approximately 2
seconds (ref. Diagram 8)
- Insert the battery again: one beep sound is emitted indicating the battery is in correct position
- Restart your EASY DOG using the remote control.
If the problem persists, contact your distributor or check out on www.numaxes.com. You can also contact
NUM'AXES at +33.2.38.63.03.84 or by Email [email protected].
Depending on the extent of the malfunction, you may have to return your product for service and repair.
Gb - 31
Reset:
connect the 2
supports of the
battery
Diagram 8