EINHELL TE-RS 40 E Manual De Instrucciones Original página 24

circumstances.
f) Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be fi tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work. You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch. An electric tool that cannot be
switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down. This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance. Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is aff ec-
ted. Damaged parts must be repaired be-
fore using the appliance. Many accidents
are caused by badly maintained electric tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, spare parts, etc. in accordance with
these instructions. Take the conditions
in your work area and the job to perform
into account. Using electric tools for any
purpose other than the one for which they are
intended can lead to dangerous situations.
Anl_SA_TE_RS_40_E_SPK8.indb 24 Anl_SA_TE_RS_40_E_SPK8.indb 24
GB
5. Service
a) Have your electric tool repaired only by
trained personnel and/or the authorized
service agent, using only genuine spare
parts. This will ensure that your electric tool
remains safe to use.
Special safety information
This tool may only be used for dry grinding/san-
ding operations.
•
Always guide the power cable away from the
back of the tool.
•
Use of the tool on materials containing asbes-
tos is prohibited.
•
Always remove the plug from the power sup-
ply socket before carrying out any work on the
machine (cleaning the sander, changing the
sandpaper, etc.).
•
Always disconnect the machine by removing
the plug from the socket, not by pulling on the
power cable.
•
Keep your workplace clean and well illumi-
nated.
•
Make sure that the workpiece is sufficiently
secured so that it cannot slip.
•
Keep children away.
•
For your own sake, keep the machine clean
at all times and check it for signs of damage
each time after using it.
•
Make sure that the switch is set to OFF befo-
re you insert the plug into the power supply
socket.
•
Make sure of your footing, particularly when
working on ladders and platforms.
•
Harmful or toxic dust can be produced when
working on wood or metal.
Touching or inhaling this dust can be harmful
for the operator and other persons nearby.
•
Hold the equipment by the insulated handles
because the grinding/sanding belt may strike
the equipment's own power cable. Damaging
a live cable may make the metal parts of the
equipment live and cause an electric shock.
•
To protect your health, always wear safety
goggles and a dust mask during sanding/
grinding work!
•
If you discover any damage to the machine,
use the exploded diagram and the spare
parts list to determine which parts need to be
ordered from Customer Service.
•
Important! Wear safety goggles and a
dust mask.
- 24 -
15.03.16 10:54 15.03.16 10:54