Step 2 - Align Door; Step 3 - Complete Installation - Haier HRC2736BWB Manual Del Usuario

INSTALLATION INSTRUCTIONS
STEP 2 - ALIGN DOOR (If necessary)
1. Using a flat-blade screwdriver, gently insert the blade under the top hinge
cover and pry up to remove.
2. Using a Phillips-head screwdriver, loosen the three top hinge screws.
3. Adjust the door or put a spacer between the hinge and cabinet, and then
tighten the screws.
4. Replace the top hinge cover by first aligning the back of the cover with the
back of the hinge, and then pressing down firmly on the front of the hinge
cover until it snaps into place.

STEP 3 - COMPLETE INSTALLATION

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
Plug into a grounded 3 prong outlet.
10
WARNING
Electrical Shock Hazard
49-60773