Virax VISIOVAL 294020 Manual De Instrucciones página 18

VI – Troubleshooting / Environment / Warranty
Problem encountered
The screen is off but the
camera head is on
Image in black and white
The camera and/or the
screen do not react
Blue screen with NO
SIGNAL marked on the
screen
Raw material recycling rather than Waste processing
WARRANTY :
In accordance with our general conditions of sale, the machines are provided with a
2-year warranty period (as shown by the invoice or delivery note). Damage resulting
from incorrect use, overload or improper handling is excluded from the warranty.
The product must not have been disassembled. The batteries and components
subject to normal wear are not covered by this warranty.
Ref. 294040 : IP 67 sealing is guaranteed only on the model delivered with the
plastic dome screwed on the head in the factory ; Dome changes performed
improperly will cancel the warranty, in case of failure due to contact of the
sensor of the camera head with a foreign body or a liquid.
Possible cause(s)
The screen plug is not
fully in the socket
The colour contrast is
set to minimum
The camera is defective
The camera is defective
The cable is broken
The plug at the back of
the screen is not
connected correctly
The cables in the plug
are defective
For European countries only
Do not throw electrical appliances out with household waste! In
accordance with European directive 2002/96/EG related to
Waste electrical or electronic equipment (WEEE) and its
transposition into national legislation, the electrical appliances
must be collected separately and recycled in a way that respect
the environment.
Page
18
Resolution
Push in the screen plug
Increase the colour contrast
setting
Recharge it or connect it to
the mains
 Virax After Sales
 Virax After Sales
Connect the plug correctly
 Virax After Sales
-EN-