General Safety Instructions - Virax VISIOVAL 294020 Manual De Instrucciones

USER GUIDE
Thank you for buying this Virax product and for the confidence you have shown in our products. Virax is a
major producer and seller of tools for the plumbing and air-conditioning trades, to assist you in your daily
work: Virax: express your talent
This documentation has been produced with care so that you can make the best use
of the machine and in complete safety. We insist on the importance of reading this
instruction manual carefully before using the machine and keeping it next to the
machine. Your new power tool will more than satisfy your expectations. It has been
manufactured under stringent Quality Standards to meet superior performance
criteria. You will find your new tool easy and safe to operate, and, with proper care, it
will give you many years of dependable service.
Save all warnings and instructions for future reference.
Important instructions and warnings are presented by symbols.
A few safety measures must be taken to ensure your protection:
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Safety instructions
The Virax machine Visioval ref. 294020/294030/294040 is designed for professional use only and may only
be used by competent people. The rules of the art in the building and public works industry must always be
respected.

General safety instructions

-
Important: Virax cannot be held responsible for any accidents that occur if the machine is used in any way
other than that for which it was designed.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the tool. Keep cord away
from heat, oil, sharp edges, moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Caution: Safety rules
Disconnect the tool before carrying out any work on the appliance.
Due to modern mass production techniques, it is unlikely that your power
tool is faulty or that a part is missing. If you find anything wrong, do not
operate the tool until the parts have been replaced or the fault has been
rectified. Failure to do so could result in serious personal injury.
Page
11
-EN-