Idiomas disponibles
Idiomas disponibles
When starting up the machine, make sure that:
- The propeller turns in the correct direction.
- There are no abnormal vibrations.
- Electrical connection is in accordance with the wiring
diagram included in the manual (voltage regulation al-
lowed only on HS – terminal LA).
- If any of the electrical safety devices blow, the appara-
tus must be quickly disconnected from the mains supply.
The whole installation should be carefully checked be-
fore trying to start up the machine again.
Maintenance
- Before manipulating the ventilator, make sure it is dis-
connected from the mains supply even if it has previously
been switched off. Prevent the possibility of anyone else
connecting it while it is being manipulated.
- The apparatus must be regularly inspected. These in-
spections should be carried out bearing in mind the ma-
chine's working conditions, in order to avoid dirt or dust
accumulating on the propeller, turbine, motor or grids.
This could be dangerous and perceptibly shorten the
working life of the ventilator unit.
- While cleaning, great care should be taken not to unsta-
ble the propeller or turbine.
- All maintenance and repair work should be carried out
in strict compliance with each country's current safety
regulations.
Reciclaje
- EEC Standards, together with the responsibility we
should assume with future generations in mind, oblige
us to recycle all the materials we can. Therefore, please
deposit all left-over material and packaging in their
corresponding recycling containers and hand in the re-
placed machines to the nearest handler of this type of
waste product.
If you have any queries about S&P products, please contact
our after-sales service in Spain, or your local S&P dealer
in any other country. If in doubt, please visit our Web-Page
at www.solerpalau.com
7
