Troubleshooting - Brandt BDVDP1050 Manual De Uso

TROUBLESHOOTING
Before calling for service, you can check the following items on
symptoms and solutions.
No sound or distorted sound:
Ensure that the unit is connected properly.
Ensure that the input settings for the TV and stereo system are proper.
No picture:
Ensure that the unit is connected properly.
No play:
Condensation has formed: wait about 1 to 2 hours to allow the player
to dry out. This player can't play discs other than DVDs, MP3 s and CDs.
The disc may be dirty and require cleaning.
Ensure that the disc is installed with the label side up.
No remote control:
Check the battery is installed with the correct polarity (+&‐).
The battery is depleted: replace it with a new one.
Point the remote control at the remote control sensor and operate.
Remove the obstacles between the remote control and the remote
control sensor. Operate the remote control at a distance of not more
than 8 meters from the remote control sensor.
No key operation (by the unit and/or the remote control) is effective:
Turn the unit off and then back to on. Alternatively, turn off the unit,
disconnect the AC power cord and the re‐connect it. (The player may
not be operating properly due to lightning, static electricity or some
other external factor.)
23