General Safety Information - Master BL 4800 Manual De Instrucciones

GB
ATTENTION!!!:
Air flow speed is reduced along with growing length of the blowing and
suction canals. Air speed will differ depending on canals and producers.
Safety measures
Never use the fan without correctly fitted air inlet and outlet grates.
Attention!!!:
The fan is intended to be used solely for portable air ventilation. The fan is
not intended to carry liquids or semi-solid materials. The motor and fan
casing may not be used in an explosive and flammable atmosphere. Use of
the fan in an explosive or flammable atmosphere may damage property,
cause bodily harm or even death. Incorrect use of the fan may cause electric
shock or electrocution. Always use the fan in compliance with the applicable
local laws and regulations.
ATTENTION!!!:
Incorrect use of the fan may cause damage to property, bodily harm or even
death. In order to mitigate the risks, always pay attention to work performed
since the working environment changes continuously. Therefore, it is
recommended to use devices to monitor the air / detect gas; if tests prove
that the atmosphere may be classified as hazardous (a place with probability
of explosion or fire due to presence of explosive liquids, flammable gases,
vapours, dust, fibres, flame or file dust) do not use the fan.
and understand the instructions below concerning safety.

GENERAL SAFETY INFORMATION

1) Do not place the fan in standing water due to an electric shock hazard.
2) Never have the air inlet grate obstructed.
3) Never pour flammable solvents or petroleum based chemicals through
the fan air inlet grate.
4) Do not use the fan in places where there may be flammable or
explosive liquids, gases, vapours, dust, fibres or file dust.
5) Never put fingers or any objects to the air inlet/outlet grates.
6) Never take out the fan outside buildings when it rains. Never store the
fan outside buildings.
7) Do not use the fan as a toy.
8) Plug the fan solely to a correctly grounded electrical socket.
9) Unplug the fan when it is not used or before it is maintained or
transferred.
NOTE: In order to reduce the risk of fire or electric shock, do not use the fan
with any electrical speed regulator.
10) Do not use the fan when its power cord or plug are damaged. Do not pull
the power cord or carry the fan by the cord, do not use the power cord as a
handle, do not close doors on the cord, and do not pull the cord along sharp
edges or corners. Keep the power cord away from hot surfaces. Do not
unplug the fan pulling on the cord – grip the plug, not the cord. Do not hold
the plug or power cord with wet hands. The power cord should be positioned
in a manner to prevent tripping on it.
11) Keep the hair, loose clothes, fingers and all body parts away from the air
inlet grate.
12) Do not allow water inside the motor. If the engine is wet for any reason,
unplug the fan and carefully dry the motor before the fan is used again.
13) Never disconnect the grounding of the power cord or of the plug as this
may cause electric shock or electrocution. If the grounding is disconnected,
the warranty will expire.
14) Be especially careful when the blower is used in proximity to children,
elderly people or house animals.
15) Do not place the fan close to open fire, cookers, heating devices or hot
surfaces.
16)The fan is not intended to be used in wet or humid locations. Never place
the blower in a place where it may fall into a bathtub or another container
with water.
17) Do not allow the power cable to rest on a table or another edge.
18)Never place the power cable under a carpet.
19) Do not hang the blower on a wall or ceiling.
20) Never use the blower without correctly fitted protective casing.
21)If the power cable is damaged, it must be replaced by the producer or a
qualified maintenance engineer in order to avoid hazardous situations.
OPERATION
1) Your new fan is completely assembled and ready to use. When you
take out the fan out of the box, check if there is no damage during
transport.
2) Before starting to use the fan, study all information on safety measures
and general safety information concerning correct and safe use of the
fan.
3) Carefully asses the working place – certain locations are considered as
hazardous since the atmosphere may contain gas vapours or dust in
explosive quantities.
NOTE! THE MOTOR AND FAN CASING MAY NOT BE USED IN ANY
EXPLOSIVE AND FLAMMABLE ATMOSPHERE CLASS. USE OF THE FAN
IN AN EXPLOSIVE OR FLAMMABLE ATMOSPHERE MAY DAMAGE
PROPERTY, CAUSE BODILY HARM OR EVEN DEATH.
4) Select a correctly grounded electrical socket.
5) Before you connect the fan to a grounded electrical socket, check the
air inlet and outlet grates and remove any particles that may obstruct
air flow. Never use the fan without correctly protected air inlet and
outlet grates. Never replace the grates with other parts not supplied by
the manufacturer.
Read carefully 6) Check the air flow direction indicator on the outside casing.
7) Place the fan on a safe surface so that it does not tilt during operation.
8) Never face directly the fan air outlet. Bodily harm may be caused by
particles thrown out by the fast moving fan blades.
9) If you have to install a canal, never do that when the fan is operating.
Place the canal edge on the canal adapter, secure it well and check the
air flow direction.
10) When a canal is used, remember that the air flow is reduced with the
length of the canal. Air speed will differ depending on the type of canal
and producer.
11) Place the fan air inlet away from walls and other obstacles in order to
assure maximum air inlet.
12) For safe operation, use the fan only when you perform gas detection
tests that are regularly repeated.
ATTENTION!!!:
ALWAYS
CONTAMINATED UNTIL PROVEN OTHERWISE. NEVER ENTER AN
ENCLOSED WORKING SPACE BEFORE IT IS CONTROLLED WITH
APPROPRIATE GAS DETECTING EQUIPMENT AND PROVEN SAFE FOR
OPERATION.
MAINTENANCE
Always turn off and unplug the fan to prevent accidental operation and
electric shock or electrocution. Before putting any objects or fingers
close to fan grates, make sure that the fan blade has stopped rotating.
1) Visually inspect all fixed elements and components if they do not
move or are not broken. If necessary, fix or replace the parts with original
parts, approved by the manufacturer.
2) Keep the fan blades clean. Dust, dirt, paint, etc. collection on the
blade fan will result that the fan blade will rotate unbalanced which may
damage it. In order to clean the fan blade, make sure that the plug is
disconnected and the fan blade does not rotate. Remove one grate and
remove particles from the blade and internal casing with a moist cloth and
delicate liquid soap. Carefully dry all parts. DO NOT WASH THE FAN
UNDER PRESSURE. Replace the grate before the next operation.
TROUBLESHOOTING IN THE FAN
All maintenance procedures may be performed when the device is
unplugged from the mains.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
ASSUME THAT ENCLOSED WORKING SPACE IS