Makita UH5570 Manual De Instrucciones página 6

Ocultar thumbs Ver también para UH5570:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Press in or pull out the cord through the opening of the
holder.
► 1. Holder 2. Cord
CAUTION:
Do not force the opening of the holder. Failure to
do so may cause deflection and damage to it.
Arm cord hook (Accessory)
CAUTION:
Do not attach the holder of arm cord hook to
other than the extension cord. Do not attach it
in a position closer to the tool beyond the hook
complete hooks. Failure to do so may cause an
accident or personal injury.
When using the arm cord hook, use the exten-
sion cord as a standard equipment. Using an
extension cord available in the market may
cause an accident or injury.
Attach firmly one hook of the hook complete to
the tool's cord and the other hook of hook com-
plete to the extension cord. Working with the
tool with a sole hook only attached may cause
an accident and injury.
Using the arm cord hook helps to minimize a risk of
cutting off the extension cord unexpectedly caused by
the loose extension cord.
1
► 1. Holder 2. Arm cord hook
Attach firmly the arm cord hook placing around your
arm and pass the extension cord through the holder.
The length of the arm cord hook band is adjustable.
NOTE:
1
Do not pass the extension cord through the
band.
Do not force the opening of the holder. Failure to
do so may cause deflection and damage to it.
Using the arm cord hook together with the waist
cord hook is more helpful.
2
OPERATION
Refer to the Important Safety Instructions before
operation.
CAUTION:
When operating the trimmer, keep extension
cord behind trimmer. Never drape it over hedge
being trimmed.
Be careful not to accidentally contact a metal
fence or other hard objects while trimming. The
blade will break and may cause serious injury.
Overreaching with a hedge trimmer, particularly
from a ladder, is extremely dangerous. Do not
work from anything wobbly or infirm.
NOTICE:
than 10 mm (3/8") in diameter with the tool. Cut
branches to 10 cm (4") lower than the cutting height
using branch cutters before using the tool.
2
► (1) Cutting height (2) 10 cm (4")
CAUTION:
Do not cut off dead trees or similar hard objects.
Failure to do so may damage the tool.
6 ENGLISH
Do not attempt to cut branches thicker
(1)
(2)
Tabla de contenido
loading

Este manual también es adecuado para:

Uh6570

Tabla de contenido