Makita UH5570 Manual De Instrucciones página 5

Vertical cut
Cut upwards with both hands pull the switch triggers B
and C and move it in front of your body.
Far area cut
To trim the hedge in far area with both hands pull the
switch triggers A and C.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Engage the extension cord
CAUTION:
• Make sure that the extension cord is unplugged
to the mains outlet.
3
► 1. Hook complete 2. Extension cord 3. Tool's cord
When engaging the extension cord, secure it to the
tool's cord with the hook complete. Attach the hook
about 100 - 200 mm from the extension cord connector.
This will help prevent unintentional disconnection.
Waist cord hook
CAUTION:
• Do not attach the holder of waist cord hook to other
than the extension cord. Do not attach it in a position
closer to the tool beyond the hook complete. Failure
to do so may cause an accident or personal injury.
• When using the waist cord hook, use the extension
cord as a standard equipment. Using an extension cord
available in the market may cause an accident or injury.
• Attach firmly one hook of the hook complete to the
tool's cord and the other hook of hook complete to the
extension cord. Working with the tool with a sole hook
only attached may cause an accident and injury.
Using the waist cord hook helps to minimizing a risk of
cutting off the extension cord unexpectedly caused by
the loose extension cord.
7
► 1. Hook 2. Tool 3. Tool's cord 4. Hook complete
5. Extension cord 6. Holder 7. Waist cord hook
5 ENGLISH
1
2
1
2
3
4
5
6