Optional Accessories - Makita DTM40 Manual De Instrucciones

Ocultar thumbs Ver también para DTM40:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Dust extraction attachment (optional
accessory)
9
1
8
2
3
10
11
12
► 1. Nozzle band 2. Dust nozzle 3. Dust nozzle
4. Dust attachment 5. Felt ring (ø 37 mm (1-7/16"))
6. Pad (with OIS marking) 7. Application tool instal-
lation bolt 8. Holes in the tool 9. Protrusions on
the nozzle band 10. Spacer 11. Felt ring (ø 47 mm
(1-7/8")) 12. Pad (with STARLOCK marking)
Install dust nozzles and dust attachment.
Install the nozzle band on the tool so that its pro-
trusions fit in the holes in the tool to secure it.
Put the felt ring and the sanding pad on the dust
attachment and then secure them with the applica-
tion tool installation bolt.
When you wish to perform cleaner operation, connect
a vacuum cleaner to your tool. Connect a hose of vac-
uum cleaner to the dust extraction attachment (optional
accessory).
4
5
6
7
9 ENGLISH
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
the battery cartridge is removed before attempt-
ing to perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs, carbon
brush inspection and replacement, any other maintenance or
adjustment should be performed by Makita Authorized or Factory
Service Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified in this
manual. The use of any other accessories or attach-
ments might present a risk of injury to persons. Only
use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Segment saw blade
Round saw blade
Plunge cut saw blade
Scraper (rigid)
Scraper (flexible)
Serrated seg blade
General joint cutter
HM remover
HM seg saw blade
HM sanding plate
Diamond seg sawblade
Sanding pad
Adapter
Abrasive paper delta (red / white / black)
Fleece delta (medium / coarse / without grit)
Polishing felt delta
Hex wrench
Dust extraction attachment
Makita genuine battery and charger
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the most
current warranty terms applicable to this product.If annexed
warranty sheet is not available, refer to the warranty details
set forth at below website for your respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
Tabla de contenido
loading

Este manual también es adecuado para:

Dtm50

Tabla de contenido