SOLAC CF4031 Instrucciones De Uso página 6

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
ENGLISH
DESCRIPTION
A
Lid
B
Filterholder Funnel
C Permanent Filter
D Water Diposit
E
Water Level
F
Glass Jug
G Keep Warm Plate
H PROG Button (Program)
I
ON/OFF Button (ON/OFF)
J
MIN Button (Minutes)
K
Hours Button (Hours)
L
Spoon
M Power Cord
USE AND CARE:
Fully unroll the appliance's power cable before
each use.
Do not use the appliance without its filter(s)
correctly in place.
Do not switch the appliance on without water.
Do not use the appliance if the on/off switch
does not work.
Do not move the appliance while in use.
Respect the MAX and MIN levels.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Unplug the appliance from the mains before
refilling the water tank.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Do not store the appliance if it is still hot.
Only use water with the appliance.
Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
CAUTION: Do not use the appliance if the
glass is cracked or broken.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products' packaging has
been removed.
Before using the product for the first time, we
recommend running it just with water.
FILLING WITH WATER:
You must fill the water compartment before
turning on the appliance.
Open the cover (A).
Fill the deposit (D) taking care to observe the
MAX level. (E) with as many cups of water as
cups of coffee you would like to make.
Close the lid (A).
FILLING WITH COFFEE:
Open the lid (A) of the filter holder (B).
Remove the permanent filter (C) from the
Filterholder (B).
Fill the removable filter (C) with ground coffee
(use 67 grams of ground coffee for each cup
to be made).
Check that the removable filter is correctly
placed in the filter holder.
You can use the measuring spoon (L) to add
coffee.
USE:
BEFORE THE FIRST USE
To ensure excellent coffee from the first cup,
we recommend rinsing with warm water as
follows:
Pour 1.5L of water into the tank (D).
Place the Permanent Filter (C) in the funnel
(B), empty, without coffee and close the lid (A)
of the coffee machine.
Place the jug (F) on the hotplate (G).
Connect to the mains. It will be displayed on
the screen 12:00.
Press ON/OFF button, the red (RUN) indicator
is illuminated,
The water will start to come out in a few
seconds.
When the water stops flowing, empty the jug,
clean the permanent filter (C) and the funnel
(B).
The machine is ready to make coffee.
If you would like to stop the machine, press
ON/OFFand the machine will stop.
TO MAKE COFFEE DIRECTLY, WITHOUT
PROGRAMMING
Fill the tank (D) with cold water according to
the "Water Filling" Section.
Add ground coffee according to the "Coffee
Filling" section.
Place the jar (F) on the hotplate.
EN
Tabla de contenido
loading

Tabla de contenido