3.3 Accessories
The following accessories are supplied with the appliance :
To move residuals into the combustion chamber
•
For warm parts
•
To clean the fumes pipes into the combustion chamber
•
For handling the grate lifter (only for mod. 697FT-697FTL)
•
Possible failure and its solution
3.4
DEFECT
Windows fire door
and/or combustion
chamber are dirty of
soot.
Not regular draft
CAUSE
− Low draft <10 Pa.
− Wrong regulation.
− Too much combustible
introduced.
− Combustible with high
humidity level.
− Not good quality
combustible.
− Flue / exhaust fumes
unsuitable or dirty.
− Stove is dirty inside.
45/92
IT IT IT IT- - - - GB
GB- - - - FR
FR- - - - ES
ES mod. 696T-696TL-697FT-697FTL
GB
GB
FR
FR
ES
ES
SOLUTION
− Check that the exhaust fumes
tube is not obstructed.
− Modify the flue : increase the
section, the height, verify the
isolation. Eliminate or reduce to
the minimum horizontal sections
and curve. Verify the section and
the height of the chimney cap
(see reflux zone)
− See charter "Regulations" and
"Fuel to be utilized"
− Reduce the quantity of fuel.
− Use dry and weathered wood
only.
− Read charter "Combustibile".
− Require chimney sweep
intervention.
− Clean the stove.