Model
Engine Models
Engine Type (Honda)
Engine Type (Robin)
Maximum Output (Honda)
Maximum Output (Robin)
Fuel Type
Fuel Tank Capacity
Starting Mechanism
Operational Weight (Honda)
Operational Weight (Robin)
Overall Dimensions (LxWxH)
Ramming Shoe Size (WxL)
Vibration Frequency
Noise Level
3 Axis Vibration
Vibration Level:
Minimum Level - EN500 Part 4.
For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
If you are unsure about the safe and correct use of your RT, consult your supervisor or Belle Group of companies.
Improper maintenance or use can be hazardous. Read and Understand this section before you perform any
CAUTION
maintenance, service or repairs.
•
This machine must only be used for its intended purpose. This machine must be operated only by well trained personnel.
•
The owner of this machine must observe, and train the user of the machine to observe, the effective Labour Protection
Regulation in the country of application.
•
This equipment is heavy and must not be lifted single-handedly, either GET HELP or use suitable lifting equipment.
•
This machine must be operated on ground where stability is guaranteed. When working near the rim of excavated trenches, use the
machine properly so that the machine may not collapse or fall down.
•
Cordon off the work area and keep members of the public and unauthorised personnel at a safe distance.
•
Personal Protective Equipment (PPE) must be worn by the operator whenever this equipment is being used (See Health & Safety
Section).
•
Make sure you know how to safely switch this machine OFF before you switch it ON in case you get into dif¿ culty.
•
Always switch OFF the engine before transporting, moving it around the site or servicing it.
•
During use the engine becomes very hot, allow the engine to cool before touching it.
•
Never leave the engine running and unattended.
•
Never remove or tamper with any guards ¿ tted, they are there for your protection. Always check guards for condition and security, if
any are damaged or missing, DO NOT USE THE RT until the guard has been replaced or repaired.
•
Do not operate the RT when you are ill, feeling tired, or when under the inÀ uence of alcohol or drugs.
•
This machine is designed to eliminate the possible risks arising from its use. However, risks DO reside, and these residual risks are
not clearly recognisable and may cause personal injury, property damage and possible death. If such unpredictable and unrecogni-
sable risks become apparent, the machine must be stopped immediately, and the operator or his supervisor must take the appro-
priate measures to eliminate such risks. It is sometimes necessary for the manufacturer to be informed of such an event for future
counter measuring.
Fuel is À ammable. It may cause injury and property damage. Shut down the engine, extinguish all open
WARNING
À ames and do not smoke while ¿ lling the fuel tank. Always wipe up any spilled fuel.
•
Before refuelling, switch off the engine and allow it to cool.
•
When refuelling, DO NOT smoke or allow naked À ames in the area.
•
When refuelling, use a proper funnel, and avoid spilling fuel over the engine.
•
Spilt fuel must be made safe immediately, using sand. If fuel is spilt on your clothes, change them.
•
Store fuel in an approved, purpose made container away from heat and ignition sources.
Technical Data
RT66
Honda GX120K1 &
Robin EH12-2D
4 Stroke, OHV, Air Cooled
4 Stroke, OHV, Air Cooled
2.6 kW
2.8 kW
Unleaded Gasoline
0.8 Gals
Recoil Starter
152.1 lbs
145.5 lbs
30.0 x 16.5 x 41.1 In
11.0 x 13.0 In
550-620 v.p.m
107 dB(A) (Robin) / 108 dB(A) (Honda)
2
74.2 ft/sec
General Safety
18
RT74
Honda GX120K1
4 Stroke, OHV, Air Cooled
N/A
2.8 kW
N/A
Unleaded Gasoline
0.8 Gals
Recoil Starter
169.7 lbs
N/A
29.7 x 16.5 x 38.7 In
11.8 x 13.2 In
550-620 v.p.m
108 dB(A)
2
44.4 ft/sec
Capítulos
Solución de problemas
