User Manual - HumanTechnik Signolux SoundMonitor Instrucciones De Servicio

Congratulations on purchasing your
»signolux soundmonitor«.
You have chosen a highly modern
and reliable system. Please read this
manual thoroughly. It will tell you how
to set up the system correctly and ex-
plain all the features this device has
to offer.
Package contents
Please check if the following parts are
included in the package:
- »soundmonitor«
- 3 x NiMH rechargeable battery,
type AA, 1,2V
(already inserted in the compartment)
- 7,5 V power supply unit
- Wall mount

- User manual

- Warranty card
If any parts are missing, please im-
mediately contact your dealer or the
manufacturer directly.
Safety instructions
- Prior to putting the device into op-
eration and using it, kindly read
this manual thoroughly and in full.
- Store this user manual in a safe
place so that it is also acces-
sible for other users at any time.
- When using power tools always
follow the instructions of the manu-
facturer and wear suitable protective
equipment (e.g. protective goggles).
- Kindly check before starting to
drill if there are any hidden elec-
tric cables or water pipes in
the walls. In case of doubt we
recommend using a a cable
detector.
Function principle
The »soundmonitor« has been desig-
ned to learn sounds and to recognise
them if they occur again. Up to three
different sounds can be memorized.
This makes it possible to bind special
acoustic signals into the signolux aler-
ting system. The soundmonitor scans
the environmental noise around it for
those sounds it has been taught to
react to.
If a memorised sound has been recog-
nised, the soundmonitor will send out
a radio signal to all paired »signolux«-
receivers within range.
The receivers indicate the radio signal
with light-, vibration- or an acoustic
alert (this depends upon the type of
receiver).
Please note that the sound recogniti-
on only works with exactly repeatable
sounds.
English 11