Menu Level - Nilfisk Liberty SC50 Instrucciones De Uso

A - ENGLISH
INFORMATION MENU DISPLAY – CONTINUED
Menu visible only with yellow (Supervisor) SmartKey.
1 2
Options
Solution
Solution In Rev
Warning Beep
Autonomy Beep
Other Sounds
Manual Light
Obstacle Color
Detergent Low
Detergent High
Detergent shown as
Neutral Delay (s)
Vac Off Delay (s)
Vac Startup
Burst Of Power (s)
Fwd Speed Max (%)
Inactivity Time (min)
*Default setting
A - 16
INSTRUCTIONS FOR USE

Menu Level

SmartFlow* (proportional to speed)
Fixed
No*
Yes
Backup Beep*
Beep On
Beep Off
Beep Off*
Beep Low
Beep Medium
Beep High
Normal*
Quiet
Off
On to Scan*
Always On
Always Off
Orange*
Red
(300,256,200,150,128,100,64,50,32,26):1
– ratio cannot be > Detergent High
(0.3, 0.4, 0.5, 0.7, 0.8, 1.0, 1.5, 2.0, 3.0, 3.8)%
– percentage cannot be > Detergent High
(300,256,200,150,128,100,64,50,32,26):1
– ratio cannot be < Detergent Low
(0.3, 0.4, 0.5, 0.7, 0.8, 1.0, 1.5, 2.0, 3.0, 3.8)%
– percentage cannot be < Detergent Low
xxx:1
x.x%
min = 0.5*
max = 5.0
step = 0.5
min = 15*
max = 25
step = 1
Full
Quiet
Last Used*
min = 60*
max = 300
step = 60
min = 50%
max = 100%*
step = 10
min = 5
max = 60
step = 5
default = 15
Nilfisk Liberty SC50 - 56091204
3
Supervisor selectable options
Adjust solution flow to speed, or fixed flow
Leave solution on in reverse?
Beep when backing up, beep always on when
moving, beep off
Beep when scrubbing autonomously – off, low,
medium, high volume
Volume of sounds (apart from horn, starting
autonomy beep, and backup beep)
"On to Scan" means the LED strip will be white
with blue corners when the 3-D vision sensor is
attempting to read a Location Tag
Color of "Obstacle" chasing lights displayed on
LED status bar when an obstacle is encountered
Set detergent ratio for detergent low level
Set detergent ratio for detergent high level
Ratio or percentage
Time to keep brushes on when in neutral
(seconds)
Time to keep vacuum on after turning off scrub
system (seconds)
Vacuum level at start
Burst-of-power (BOP) time span (seconds)
Maximum forward speed as percentage of
maximum available speed in manual mode
Inactivity time before putting machine in sleep
mode (minutes)
Notes
2/2019