Yukon Signal N320RT Manual De Instrucciones página 9

When reviewing files, some control functions are not available:
Enter menu
ZOOM control
IR Illuminator control
If the IR Illuminator was on, it turns off when entering the REVIEW mode. The IR Illuminator power level is
saved. On exiting REVIEW mode, the IR Illuminator will be switched on with the previously saved power
level.
9
MENU
Menu navigation:
ZOOM (4) button:
Long press – enter the main menu;
Brief press – enter the submenu;
Brief press – confirmation of selection in submenu, with simultaneous exit to the main menu;
Long press – exit submenu without confirmation of selection (in some cases with confirmation, specified
separately in the description of menu sub-items);
Long press – exit main menu.
IR button (3) – menu navigation – downwards or rightwards;
REC button (5) – menu navigation – upwards or leftwards;
Automatic exit – after 10 seconds of inactivity in the menu (or submenu) exit to the main screen takes
place automatically. In some submenus automatic exit is not possible.
Menu contents
Brightness setup
Wi-Fi setup
Video/photo resolution selection
11
Date and time setup
Sound record activation
About device
i
Brightness setup
Hold down the ZOOM (4) button to enter the main menu.
Use the IR (3) and REC (5) buttons to select submenu "
Enter the submenu with a short press of the ZOOM (4) button.
Use the IR and REC buttons to set display brightness level from
Wi-Fi Setup
This menu item allows you to set a password for the access point. This password is used to connect an
external device (such as a smartphone, for example) to your unit.
Hold down the ZOOM (4) button to enter the main menu.
Use the IR (3) and REC (5) buttons to select submenu "Wi-Fi Setup"
Enter the submenu with a short press of the ZOOM (4) button.
A password appears on the display – by default "12345".
Use the navigation buttons to set your desired password (REC button to increase the value; IR button to
decrease the value). To switch between digits, briefly press the ZOOM button.
To save the password and exit the submenu hold down the ZOOM button for longer than one second.
Wi-Fi indication on the display:
- Icon glows – Wi-Fi is on;
- Icon blinks – connection is established.
Setting Wi-Fi access levels
This option allows you to set required access level of the Stream Vision application to your device.
Brightness setup ".
0 to 20.
12