Date And Time Setup - Yukon Signal N320RT Manual De Instrucciones

Hold down the ZOOM (4) button to enter the main menu.
Use the IR (3) and REC (5) buttons to select submenu "Wi-Fi Setup".
Enter the submenu with a short press of the ZOOM (4) button.
Enter the submenu "Setting Wi-Fi access levels" with a short press of the ZOOM button.
Access level Owner . Stream Vision user has the complete access to all device's functions.
Access level Guest . Stream Vision user has the access only to the video stream from the device.
Stream Vision Technology
With the help of Stream Vision technology you can stream image from the display of your
Signal RT unit via Wi-Fi to a smartphone or PC tablet. You can find further guidelines on Stream Vision on
our web site www.yukonopticsglobal.com
Video/photo resolution selection
This menu item allows you to select the resolution of a video recording or photo shot, depending on the
active mode.
Hold down the ZOOM (4) button to enter the main menu.
Use the IR (3) and REC (5) buttons to select submenu "
Enter the submenu with a short press of the ZOOM button.
Use the IR and REC buttons to select one of the video recording resolution (pixels): 240p (320x240) or
480p (640x480) (if the unit is in the Video mode)
Use the IR and REC buttons to select one of the photo resolution (pixels): 240p (320x240);
480p (640x480) or 960p (1280х960) (if the unit is in the Photo mode).
Note:
Resolution is displayed only in the REVIEW mode.
The selected value is saved.
When the unit is next switched on, the display will show the latest saved value.
13
Video/photo resolution selection ".

Date and time setup

This menu option allows you to set the current date and time, and time format.
Date setup
Hold down the ZOOM (4) button to enter the main menu.
Use the IR (3) and REC (5) buttons to select submenu "
Enter the submenu with a short press of the ZOOM button.
Date format is displayed as: yyyy/mm/dd (2017/04/12)
Use the navigation buttons to select desired value (REC button to increase value; IR button to decrease
value). To move from one digit to another briefly press the ZOOM (4) button.
To save the date and go to time setup, press and hold down the ZOOM button for more than one second.
Time setup
Enter the submenu with a brief press of the ZOOM (14) button.
Time format is displayed as: "format mm/hh" (24 06:51)
Use the navigation buttons IR (3) / REC (5) to select the required time format - 24/AM/PM. To set the hour
value, briefly press the ZOOM button.
Use the navigation buttons to select the hour value (REC button to increase the value; IR button to
decrease the value).
To set the minute value, briefly press the ZOOM button.
Use the navigation buttons to select the minute value (REC button to increase the value; IR button to
decrease the value).
To save the time settings and to exit the submenu, press and hold down the ZOOM button for more than
one second.
Current time in the format selected is shown on the display.
The set value is saved.
When the unit is next switched on, the display shows the latest saved value.
Video/photo resolution selection ".
14