Additional Drying; Care And Cleaning; Maintenance Wash; External Cleaning - AEG L 75480 WD Manual De Instrucciones

24 www.aeg.com
The experience will help you to dry the
laundry in a more correct way. Take note
of the duration drying time of the cycles
done before.
To avoid the static charge at the end of
the drying cycle:
• Use fabric conditioner in the washing
cycle.
• Use special fabric conditioner for tum-
ble dryers.
When the drying programme is comple-
ted remove the laundry in a short time.

13. CARE AND CLEANING

WARNING!
Disconnect the appliance from the mains
supply before you clean it.
13.1 Descaling
The water we use contains limescale. If it
becomes necessary, use a water softener
to remove limescales.
Use a special product made for washing
machines. Obey the instructions that you
find on the packaging of the manufactur-
er.
Do this separately from the laundry
wash.

13.2 External cleaning

Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
13.4 Door seal
13.5 Drum
Regularly examine the drum to prevent
limescale and rust particles.
Only use special products to remove rust
particles from the drum.

12.8 Additional drying

If, at the end of the drying programme,
the laundry is still damp, set a short dry-
ing cycle again.
WARNING!
To avoid creases of fabrics or
shrinks of the clothing do not
over dry the laundry.
CAUTION!
Do not use alcohol, solvents or
chemical products.

13.3 Maintenance wash

With the low temperature programmes it
is possible that some detergent stays in
the drum. Make regularly a maintenance
wash. To do this:
• Empty the laundry from the drum.
• Set the hottest cotton wash pro-
gramme
• Use a correct quantity of powder de-
tergent with biological properties.
After each wash, keep the door open for
a while to prevent mould and to let un-
pleasant smells go out.
Regularly examine the seal and remove
all objects from the inner part.
To do this:
• Clean the drum with special product
for stainless steel.