Safety Instructions - JB Systems Light MB30 Manual De Instrucciones

ENGLISH
®
Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please
read these operating instructions very carefully before you start using this unit.
FEATURES
This product meets the requirements of the current European and national guidelines. Conformity has been established
and the relevant statements and documents have been deposited by the manufacturer.
 This device has been designed to produce decorative effect lighting and is used in light show systems.
 Mirror ball with plastic ball inside.
 Second security ring.
 Real glass mirrors
 Mirror size: 10x10mm
BEFORE USE
 Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the
device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to
strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not
subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by
disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.
Check the contents:
Check that the carton contains the following items:
 Operating instructions
 MB30/MB40/MB50

SAFETY INSTRUCTIONS:

This symbol means: indoor use only.
This symbol means: Read instructions.
 To protect the environment, please try to recycle the packing material as much as possible.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object
enters the unit, immediately disconnect the mains power.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
 The housing and the lenses must be replaced if they are visibly damaged.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
 Always use an appropriate and certified safety cable, connected to the second safety eye, when installing the unit.
Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering from
epilepsy.
JB SYSTEMS
®
OPERATION MANUAL
1/12 MIRRORBALL MB30+MB40+MB50
ENGLISH
OVERHEAD RIGGING
 Important: The installation must be carried out by qualified service personal only. Improper installation can
result in serious injuries and/or damage to property.
Working load limits should be respected, certified installation materials should be used, the installed device
should be inspected regularly for safety.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
 The device should be installed out of reach of people and outside areas where persons may walk by or be seated.
 Before rigging make sure that the installation area can hold a minimum point load of 10times the device's weight.
 Always use a certified safety cable that can hold 12times the weight of the mirror ball. This secondary safety
attachment should be installed to the second safety eye in a way that no part of the installation can drop more than
20cm if the main attachment fails.
 Make sure that the chain used to hang the mirror ball can hold at least 12times the weight of the mirror ball. The length
of the chain must never exceed 100cm.
 If you use a mirror ball motor, make sure to use an appropriate motor that can hold the weight of the mirror ball.
 In order to have a safe installation, you MUST follow the installation instructions supplied with the mirror ball.
 Make sure the rotation of the mirror ball is never slowed down or stopped by surrounding materials.
 The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert
before using them for the first time. The installations should be inspected every year by a skilled person to be sure that
safety is still optimal.
MAINTENANCE
 Make sure the area below the installation place is free from unwanted persons during servicing.
During inspection the following points should be checked:
 All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded.
 Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation.
 When an optical mirror is visibly damaged due to cracks or deep scratches, it must be replaced.
 The cleaning of the optical mirrors must be carried out periodically to optimize light output. Cleaning frequency
depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause
greater accumulation of dirt on the unit's optics.
 Clean with a soft cloth using normal glass cleaning products.
 Always dry the parts carefully.
 Clean the mirrors at least every 90 days.
SPECIFICATIONS
MB30 – 30cm Mirror ball:
Mirror size: 10mm x 10mm
Diameter: 30cm
Weight: +/-2,2kg
MB40 – 40cm Mirror ball:
Mirror size: 10mm x 10mm
Diameter: 40cm
Weight: +/-3,8kg
MB50 – 50cm Mirror ball:
Mirror size: 10mm x 10mm
Diameter: 50cm
Weight: +/-5,3kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS
®
OPERATION MANUAL
Overhead rigging requires extensive experience!
2/12 MIRRORBALL MB30+MB40+MB50