Bosch CET8-15W Instrucciones De Funcionamiento página 3

to your body. Entangled or snarled hoses can
cause a loss of balance or footing in addition to
unintentional tool operation. Attach the hose to
the structure to reduce the risk of loss of balance
if the hose shifts.
Do not abuse the air hose. Protect all hoses
from kinks, restrictions, solvents or sharp ob-
jects. keep air hose away from heat, oil, sharp
edges or moving parts. Replace damaged hoses
immediately. Damaged hoses can burst or whip
around work area.
Only use hoses with a minimum rating of 200
PSI. Use of hoses with a high pressure rating re-
duce the risk of injury from a hose bursting.
Firmly grasp hose in hand when installing hos-
es. If hose is not held firmly or correctly installed,
hose may whip and injure personnel in the oper-
ating area.
Use care when lifting and carrying the com-
pressor. Some compressors are too heavy to be
lifted by one person. Get assistance before at-
tempting to lift a compressor to reduce the risk of
injury.
When moving or loading a wheeled compres-
sor ensure that the compressor is always on
a level surface. If the compressor is placed on
a sloped surface, it may move unexpectedly and
result in personal injury.
This product contains chemicals, including lead, known to the State of California to cause
birth defects and other reproductive harm.
Wash hands after using.
TOOl USe AND CAre
Use this compressor and all accessories in ac-
cordance with the instructions. Compressor
and accessories must be used for the purpose for
which they are designed. Use of the compressor
for operations other than what is described in this
manual can result in a hazardous situation.
Use only accessories that are recommended
by BOSCH for your particular model. Acces-
sories that may be recommended for a particular
model tool may not be suitable on other model
tools and may result in personal injury.
Before each use, inspect all fittings, hoses,
pipes, connections of the compressor.
not operate if any portion of the compressor
is loose, missing, damaged, malfunctioning,
disconnected or altered. Never use a com-
pressor that appears damaged or is operating
abnormally. If the compressor appears to be op-
erating unusually and/or making strange noises,
stop using it immediately and contact your local
BOSCH service center. There is a risk of bursting
if the compressor is damaged.
Before each use inspect compressor for signs
of leaks or damage. If leaks are found in the
compressor pump, air tanks or tubing, replace
compressor immediately. Never attempt repair
leaks, weld or make modifications to the air tank
or other fluid confining parts as there is a risk of
bursting.
Do not attempt to operate this air compressor
without first verifying the oil level in the crank-
case. This compressor is shipped with oil in
the crankcase. Serious damage of the compres-
sor can result from even momentary operation
without proper lubrication.
Never operate the compressor without the
safety valve. Verify operation of the safety
valve on a daily basis. Do not use the safety
valve for complete tank drainage. The safety
valve is designed to relieve tank pressure to re-
duce the risk of bursting.
Never operate compressor without all guards
and other safety features in place and perform-
ing intended function. If maintenance or servic-
ing requires removal of guard or safety feature, be
sure to replace the guard or safety feature before
resuming operation of the compressor. Replace
damaged guards or safety features immediately.
Never touch moving parts. Do not place any
part of your body near compressor moving parts.
Do not reach around guards to reduce the risk of
injury.
Do not operate compressor without the air fil-
ter. Filters prevent large particles from entering
the air stream and damaging compressor internal
components.
Do not allow particulates such as sawdust to
fall into crankcase when crankcase is open for
inspection. Particulates in oil may reduce com-
pressor life.
Do not use a detergent oil in crankcase. Deter-
gent oils will leave deposits on internal compres-
sor components reducing compressor life and
components.
Do not use compressor for unattended opera-
tion. Always remain in area when compressor is
operating and turn off compressor when not in
use to reduce the risk of fire.
Do Never place objects on top or next to com-
pressor. locate compressor at least 12 in. (30
cm) away from all obstructions. Restricting
any of the compressor's ventilation openings can
cause overheating and could cause a fire.
Do not operate the compressor with any pow-
er source other than that specified in the tool
operating/safety instructions. Use of alterna-
tive power sources may result in malfunctions of
3