Maintenance And Cleaning - S&P TURBO-355 N Manual De Instrucciones

OPERATION
• Once we have checked that the grid voltage corresponds with that shown on the device's
data plate and that the speed selector is in the halt position, connect the device to the grid.
• Select the speed at which we want the device to work, by rotating the speed selector, in
line with the following values:
0 HALT
1 QUICK SPEED
2 MEDIUM SPEED
3 SLOW SPEED
• Once the operation speed is selected, the device starts up automatically.
• The devices in the TURBO series have an adjustable head, which you can bend upwards
or downwards in line with your needs (Fig. 2).
• On the TURBO-455 CN PLUS model, you can also adjust the height of the fan, by loose-
ning the height adjustment nut, located in the middle of the telescopic tube (Fig.3).

MAINTENANCE AND CLEANING

• Ensure that the device is disconnected from the electrical grid before carrying out any
maintenance and/or operation work.
• Never use petrol or aggressive and/or abrasive dissolvents to clean the device, using
instead a cloth dampened with water.
• Do not immerse the appliance or spray pressurized water to clean it.
• In order to access the blade of the device, remove the front protection grille, bearing in
mind that a screwdriver is required to remove the safety 4 screws.
• Once the cleaning operation is complete, remember to return the protection grille using
the safety 5/6 screws, in order to avoid accidents.
Important: Make sure the fan is disconnected from power supply before removing the pro-
tection.
PUTTING OUT OF SERVICE AND RECYCLING
• Should it be put out of service, even if only temporarily, we recommend keeping the de-
vice in a dry place, free from dust, within its original packaging.
• EEC legislation and our undertaking with future generations mean we should
always recycle materials; please do not forget to deposit all excess packaging
elements in the corresponding recycling bins, and take the replaced devices to
the nearest Waste Management Plant.
THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY DAMAGE TO PERSONS AND OB-
JECTS DERIVING FROM BREACH OF THESE WARNINGS.
8