Charging Your Device - unotec LB-RUN Manual De Uso

Answer call: press the
End call: press the
Transfer call voice: press the
mobile phone and device.
Reject call: double press the
Connect two mobiles simultaneously: press the
device, then keep on press the
name of the device on two mobile phones, then press the name for pairing and connecti ng.
Connecti ng successfully: when there is a call from the fi rst mobile phone, press to receive
the call. At that ti me, there is a call from the second mobile phone, press the
to hold the call of the fi rst mobile phone, and receive the call from the second mobile phone.
Transfer calls between two mobile phones: press twice the
between two mobile phones.
Replay the phone: in stand-by mode or playing music, then press the
Mute: when talking, double press the
ti mes.
Turn off the voice noti fi cati ons: enter the pairing mode, then press "-" for 3 seconds, the red
LED will fl ash 3 ti mes.
Turn on the voice noti fi cati ons: enter the pairing mode, then press "+" for 3 seconds, the
blue LED will fl ash 3 ti mes.

Charging your device

1. Connect the charger to the charging socket on the headset.
2. During charging, the indicator light will turn red.
3. When the headset is fully charged, the red indicator light changes to blue. Unplug the
charger from the headset.
WARNING:
We suggest using only qualifi ed and approved chargers from regular manufacturers, if not,
that may cause damage to the headset and invalidate any warranty on the product.
Repeatedly charging and discharging of the headset, over ti me will cause the batt ery perfor-
mance to diminish. This is normal for all rechargeable batt eries.
If not used for more than 12 months, we suggest to fully charge the device again.
Pairing to a computer
1. If your computer does not have Bluetooth, you can connect and use a Bluetooth dongle.
Then make sure the Bluetooth functi on it is enabled.
2. Turn on the device and go to pairing mode.
3. Open the Bluetooth soft ware (for example, BlueSoleil) installed on your computer, and
select "Search for Bluetooth devices". Refer to user manual of the Bluetooth soft ware for
more informati on.
4. Aft er a few seconds, device names will be listed. Select the device name icon and click
right butt on of mouse to select the pairing item, then select to connect with audio device.
Devices will now be paired.
6
butt on once to answer the incoming call.
butt on once to end call.
butt on for 2 seconds to transfer the call voice between the
butt on to reject the incoming call.
butt on for 5 seconds to come into pairing mode. Find the
butt on for 3 seconds to power on the
butt on for 3-5 seconds, the purple LED will fl ash 3
butt on once
butt on to transfer the calls
butt on twice.