cecotec CONGA 1190 Serie Manual De Instrucciones página 32

ENGLISH
Note: in order to ensure a smooth signal reception, do not place mirrors or other reflecting
surfaces near.
3. Install the side brushes into their correct position at the bottom of the product.
4. Turn on the power switch. I: ON, O: OFF.
WARNING: once the robot has finished cleaning, do not turn the power switch off in order to
allow the robot to charge properly.
5. Place the robot on the charging base. Make sure the charging terminals on the robot and
the base match.
a. When the
b. When the
Note: allow the robot to charge for 12 hours during the first charge.
32
flashes blue, the robot is charging.
is lit up steady blue, the charge has been completed.