Troubleshooting - ECG VP 3143 S Manual De Instrucciones

Cleaning output air fi lter
Before leaving the vacuum cleaner, the air is cleaned in the output fi lter. You can clean the output fi lter as
follows:
1.
Turn off power and unplug the power cord from the outlet.
2. Open the output grid qs in the back of the vacuum cleaner.
3. After opening the grid you will see the output fi lter.
4. Rinse the fi lter under running water and let it dry thoroughly.
5. Return fi lter back to its place (or replace with a new one) and snap on the grid in the back of the vacuum
cleaner.
GB

TROUBLESHOOTING

Before requesting service, check the following list of possible common problems and their solution.
Problem
Motor does not switch
on.
The suction power
gradually decreases.
38
Possible cause
Vacuum cleaner is without power
supply
Full dust bag, clogged hose or
tubes or dirty fi lters.
Solution
Check power supply cord and the electric
outlet.
If the device remains inoperative, contact
the authorized service.
Replace dust bag, remove foreign objects
from the hose or tube, replace fi lters.