Troubleshooting; Technical Specifications - ECG VP 2122 S Manual De Instrucciones

TROUBLESHOOTING

Before referring to a service centre, check the following list of common problems and how to remove
them.
Problem
The motor will not start.
The suction power is
reduced.

TECHNICAL SPECIFICATIONS

Suction power 170 W
Dustbag capacity – 1.6 l
GB
Full dustbag indicator
7 m operating radius
Accessories:
Plastic fl oor brush
Crevice tool
Weight: 2.5 kg
Nominal voltage: 230 V~ 50/60 Hz
Nominal input power: 1000 W
Noise level: < 80 dB
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg.cz.
Changes in text and technical parameters reserved.
32
Possible cause
The vacuum cleaner is not
powered.
Full dust bag, clogged hose or tube
or dirty fi lters.
Solution
Check the power cord and plug.
Refer to an authorized service centre if the
problems persist.
Replace the dust bag, remove foreign
objects from the hose or tube, replace
fi lters.
ECG
665/2013 - I
VP 2122 S
A
B
C
C
D
E
F
G
38.2
kWh/annum
F
80
AB C DE G
dB
F B
ABCDE G A C DEFG
08/05