Maintenance And Cleaning; Troubleshooting; Technical Data - ECG VP 4102 S Manual De Instrucciones

MAINTENANCE AND CLEANING

Attention:
Always unplug the power cord from the outlet before any maintenance and
cleaning.
1. Changing the dust bag: When the full dust bag indicator changes to red,
it is time to empty the dust bag or replace it.
• Press the release button in front to open the cover.
• Remove the bag holder and take off the full bag from the holder.
2. Motor filter cleaning: Open the front cover, remove the filter, wash
it in warm water and dry it thoroughly prior to next use. If the filter is
damaged replace it with a new one.
3. Once a year clean or replace the output filter: Remove the cover of the output filter. Wash the filter in warm
water and dry it thoroughly prior to next use. If the filter is damaged replace it with a new one.
4. Cleaning of the appliance surface: Use a soft cloth lightly moistened with a few drops of detergent for
cleaning. Never use solvents or other abrasive cleaners. Never immerse the vacuum cleaner into water or
GB
any other liquid and do not leave it under running water.
Attention:
You can find replacement filter bags for vacuum cleaner VP 4102 S under KOMA ECG VP 4102 S and you can use
also the bags Swirl® Y 50® MicroPor® Plus.

TROUBLESHOOTING

Before contacting the service, check the following list of common problems and possible remedies.
Problem
The motor will not
start.
The suction power
is reduced.

TECHNICAL DATA

Automatic rewinding, control of suction power, tapered nozzle, floor brush, telescopic metal tube
Suction power: 200 W
Range: 11 m
Dust bag capacity: 4 l
Weight: 7.2 kg
Nominal voltage: 220–240 V~ 50/60 Hz
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
32
32
Possible cause
The vacuum cleaner is not powered. Check the power cord and the electrical outlet.
Full dust bag, clogged hose or tube,
dirty filters.
Solution
If the device still does not work, contact an
authorized service centre.
Replace the dust bag, remove foreign objects
from the hose or tube, replace the filters.
Nominal input power: 800 W
Maximum power consumption: 1000 W
Noise level: 78.3 dB
Filter: output filter, motor filter HEPA 13