ECG RS 5011 Manual De Instrucciones página 31

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
8. Do not use the device for any other purpose than the stated one.
Use for processing food only. Do not use it to stir hot foods and
liquids! Always add liquid to the blended ingredients.
9. Do not leave the appliance with the power cable plugged in
unattended. Prior to maintenance, installation, assembly and
disassembly of parts or cleaning, unplug the power cord from
the power outlet. Do not remove the power cord from the outlet
by yanking the cord. Unplug the power cord from the outlet by
grasping the plug.
10. Do not use the appliance close to a source of heat, e. g. oven. Protect
it against direct sunlight.
11. Never cover the appliance during operation and do not use it close
to flammable materials, e. g. curtains, etc.
12. Do not insert large pieces of food into the appliance. Never put in
materials like paper, metal, cardboard, plastics, etc.
13. Never switch on the appliance when the container is empty and do
not remove the container until the blades come to a stop. Before
starting the device, set the bowl in its proper position, attach the
blade to the motor and then plug the cord into the outlet. This
reduces the risk of injury.
14. Do not touch the moving parts.
15. Hair, fingers or parts of clothing shall be kept far enough from the
moving parts of the appliance. Do not place any tools or hands into
the bowl while blending, risk of injury or damaging the appliance.
Spatula may be used only when the appliance is off.
16. Avoid contact with moving parts. Do not touch the beaters during
operation with hand, clothing, cloth or other utensils, you will
reduce the risk of injury and/or damage to the appliance.
17. Always use the appliance on an even and stable surface.
18. Do not allow the power cord to touch hot surfaces or run the cord
over sharp edges.
19. Use accessories only advised by the manufacturer, otherwise you
risk losing the warranty.
GB
31
Tabla de contenido
loading

Tabla de contenido